Thursday, 26 September 2019

Design and Analysis of Microstrip Antenna Using RBF-NN for Multiband Operation

Volume 8 Issue 3 March - May 2018

Research Paper

Design and Analysis of Microstrip Antenna Using RBF-NN for Multiband Operation

Mohd Gulman Siddiqui*, Abhishek Kumar Saroj**, Rohini Saxena***, Devesh Tiwari****, J.A. Ansari*****
*-**** Research Scholar, J.K. Institute of Applied Physics and Technology, University of Allahabad, Allahabad, Uttar Pradesh, India.
***** Professor, Department of Electronics Engineering, University of Allahabad, Allahabad, Uttar Pradesh, India.
Siddiqui. M. G., Saroj. A. K., Saxena. R., Tiwari. D and Ansari. J.A. (2018). Design and Analysis of Microstrip Antenna Using RBF-NN for Multiband Operation. i-manager's Journal on Electronics Engineering, 8(3), 36-44. https://doi.org/10.26634/jele.8.3.14390

Abstract

The analysis of Multiband Microstrip Antenna (MSA) using Neural Network (NN) through Radial Basis Function (RBF) has been descibed in this paper. Two parallel slots have been inserted on the patch of MSA. The estimation of bandwidth with the variation of these slots has been trained and tested using ANN. The antenna resonates at frequencies 2.465 GHz, 3.455 GHz, and 5.17 GHz with obtained fractional bandwidth of 5.601 MHz, 8.09 MHz, and 16.80 MHz, respectively. The geometry of antenna is then simulated using HFSS simulation software. The results are measured and tested using vector network analyzer. The frequency bands meet the design specification of covering the WLAN and WiMAX application at C-band.

No comments:

Post a Comment