An Article on CNC Upgradation

Volume 9 Issue 1 September - November 2018

Article

An Article on CNC Upgradation

Shradha Sanjay Sandanshiv*, Swapnali Dayanand Shete**, Shraddha Shrimant Shinde***, M. M. Narkhede****

*-*** BE Graduate, Department of Electronics and Telecommunication Engineering, Pimpri Chinchwad College of Engineering, Nigdi, Pune,Maharashtra, India.

**** Assistant Professor, Pimpri Chinchwad College of Engineering, Nigdi, Pune, Maharashtra, India.

Sandanshiv,S.S., Shete,S.D., Shinde,S.S., & Narkhede,M.M.(2018). A Review Paper On CNC Upgradation. i-manager’s Journal on Electronics Engineering, 9(1), 1-6. https://doi.org/10.26634/jele.9.1.14425

Abstract

This paper deals with the upgradation of CNC machine and its flexibility for modern technologies. In this paper, designing of control panel and its implementation is discussed. Different components are mounted in control panel to protect the system in case of power failure and protect motors against phase down. Almost all the industries use PLCs now-a-days because it is highly compatible, reduces wiring, and makes the design more compact and reliable. This is as up-gradation of CNC machine. Generally, PLCs are programmed in “ladder logic”, which strongly resembles a schematic diagram of relay logic. Different ladder logics are developed for performing different operations. This article can be extended further by emerging it with IIoT, i.e. Industrial Internet of Things, where we can monitor CNC machines from remote place.